Series 3 Station wagon seat belt floor mounts

GSF 109 · Aug 2, 2020

Hi all,

just wondering if anyone has fitted the second row seatbelt mountings on a station wagon floor?
I bought the kit and the crossmember to suit from YRM but there are no fitting instructions.
Any help with pics would be great!
See attached pic of the mounting kit.

GSF 109 · Aug 3, 2020

All sorted now. A bit easier once I sat everything in place.

ciderman · Aug 3, 2020

I fit a galvanised steel bar 30 x 10 across the chassis inside the first floor support- this is bolted to the chassis each side.
also i weld 25 x 3 straps on the upstand strengthening plates(where seat belt stalks fit) to the chassis....

GSF 109 · Aug 3, 2020

Thanks for your comment. I found that the 110 uses these mounts if you use the correct crossmember which I got from YRM. This apparently replicates the original Landrover fitment so should be plenty strong enough

Series 3 Station wagon seat belt floor mounts

GSF 109

Well-Known Member

GSF 109

Well-Known Member

ciderman

Active Member

GSF 109

Well-Known Member

Similar threads