Starter motor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

typhoo

New Member
Posts
18
Can anyone help please, I need to replace the starter motor on my
1991 Defender 90 200TDI, is there a sequence I need to stick to to make things easier, or is it just a case of throwing as many bits out of the way as possible to get access.
Thanks
Typhoo
 
drop the eggzorst downpipe out of the way, then, provided you've got a decent 3/8" socket set, with a selection of extension / wobble bars, it aint too bad.
 
Can anyone help please, I need to replace the starter motor on my
1991 Defender 90 200TDI, is there a sequence I need to stick to to make things easier, or is it just a case of throwing as many bits out of the way as possible to get access.
Thanks
Typhoo

Er, you going in from the top or the bottom? :confused:
 
Disconnect your battery first, or you will end up with sparks and explosions... wait, in that case leave it connected and film it for us (ware goggles).
 
New starter arrived now, good point, yes I'll get the old one sorted for a spare.
Thanks for the info.
Typhoo
 
Back
Top