Sprintex Supercharger

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
B

Brian Tonks

Guest
PLEASE HELP

I have purchased a sprintex supercharged engine that was fitted into a wood
and picket Range Rover. When we came to look at the internals of the charger
we have found that someone has taken one of the internal screws out. I need
replacement parts for this or a replacement unit but we can't find any
anywhere.

Brian Tonks
Tonks4x4
27-29 Main Street
Huthwaite
Sutton-In-Ashfield
Nottinghamshire
NG17 2LD
01623 452885

http://www.tonks4x4.com



 
Brian Tonks wrote:

> I have purchased a sprintex supercharged engine that was fitted into a wood
> and picket Range Rover. When we came to look at the internals of the charger
> we have found that someone has taken one of the internal screws out. I need

Is it just one screw you need? If so can you not find another in the
supercharger of the same size/thread to measure that?

> replacement parts for this or a replacement unit but we can't find any
> anywhere.

What would worry me is why it was apart in the first place and the
quality of repair if it went back together missing bits....

Regards

William MacLeod

 
Brian Tonks wrote:
> PLEASE HELP
>
> I have purchased a sprintex supercharged engine that was fitted into a wood
> and picket Range Rover. When we came to look at the internals of the charger
> we have found that someone has taken one of the internal screws out. I need
> replacement parts for this or a replacement unit but we can't find any
> anywhere.
>
> Brian Tonks
> Tonks4x4
> 27-29 Main Street
> Huthwaite
> Sutton-In-Ashfield
> Nottinghamshire
> NG17 2LD
> 01623 452885
>
> http://www.tonks4x4.com

Have you tried these people:
http://www.rovasystemsmotorsport.co.uk/products.asp?category=induction kit


It doesn't look as though they will be able to help directly but might
be able to point you elsewhere. And ,as Willie suggests, don't you have
anything that you could copy?
 
[email protected] wrote:
> Brian Tonks wrote:
>
>> I have purchased a sprintex supercharged engine that was fitted into
>> a wood and picket Range Rover. When we came to look at the internals
>> of the charger we have found that someone has taken one of the
>> internal screws out. I need
>
> Is it just one screw you need? If so can you not find another in the
> supercharger of the same size/thread to measure that?
>
>> replacement parts for this or a replacement unit but we can't find
>> any anywhere.
>
> What would worry me is why it was apart in the first place and the
> quality of repair if it went back together missing bits....
>
> Regards
>
> William MacLeod

I could be wrong here but I think he means the big vaney thingy that does
the compressing not a bolt type screw

--
Andy

SWB Series 2a ( dressed as a 3) "Bruce"
It's big, it's mean it's really, really green


 
Andy.Smalley wrote:

> [email protected] wrote:
>
>>Brian Tonks wrote:
>>
>>
>>>I have purchased a sprintex supercharged engine that was fitted into
>>>a wood and picket Range Rover. When we came to look at the internals
>>>of the charger we have found that someone has taken one of the
>>>internal screws out. I need
>>
>>Is it just one screw you need? If so can you not find another in the
>>supercharger of the same size/thread to measure that?
>>
>>
>>>replacement parts for this or a replacement unit but we can't find
>>>any anywhere.
>>
>>What would worry me is why it was apart in the first place and the
>>quality of repair if it went back together missing bits....
>>
>>Regards
>>
>>William MacLeod
>
>
> I could be wrong here but I think he means the big vaney thingy that does
> the compressing not a bolt type screw

Ah, yes! I missed that, too - you could well be right.
 
Andy.Smalley wrote:

> I could be wrong here but I think he means the big vaney thingy that does
> the compressing not a bolt type screw

??!! if that's the case (and now I think about it, it sounds like it..)
then what the OP is saying is "I have a supercharger case, all I need
is the insides". For the OP, I don't know if you've been in contact
with Sprintex but their site gives the UK supplier as these guys, maybe
they can help you:

http://www.rovasystemsmotorsport.co.uk/products.asp?category=induction kit

Regards

William MacLeod

 
Sorry guys yes it was one of the veins that I am missing. It was removed to
allow the air to flow through the intake of the charger as someone along the
line says it was too expensive to run with it connected.

I have spoken to Dennis Priddle the chap that invented it and they are no
longer made and there was never any spare parts if you broke it you had to
buy another. I posted to the group in the attempt that someone may have a
complete system sat in the shed or something.....

Sprintex Australia bought the rights to the system with any bits that Dennis
had but as soon as the got all this they changed the design...

Brian Tonks

"Dougal" <DougalAThiskennel.free-online.co.uk> wrote in message
news:[email protected]...
> Brian Tonks wrote:
> > PLEASE HELP
> >
> > I have purchased a sprintex supercharged engine that was fitted into a
wood
> > and picket Range Rover. When we came to look at the internals of the
charger
> > we have found that someone has taken one of the internal screws out. I
need
> > replacement parts for this or a replacement unit but we can't find any
> > anywhere.
> >
> > Brian Tonks
> > Tonks4x4
> > 27-29 Main Street
> > Huthwaite
> > Sutton-In-Ashfield
> > Nottinghamshire
> > NG17 2LD
> > 01623 452885
> >
> > http://www.tonks4x4.com
>
> Have you tried these people:
>
http://www.rovasystemsmotorsport.co.uk/products.asp?category=induction kit
>
>
> It doesn't look as though they will be able to help directly but might
> be able to point you elsewhere. And ,as Willie suggests, don't you have
> anything that you could copy?


 
You must log in or register to reply here.

Similar threads

B
Land Rover Discovery 4.2 V8EFi (Shameless plug)
Replies
0
Views
555
Brian Tonks
B
B
FS 4.2 V8 Discovery
Replies
0
Views
621
Brian Tonks
B
Back
Top