Shadowcaster
New Member
- Posts
- 5
- Location
- Kernow, England's Anchor.
1994 ES V8 on LPG (300 type)
Ain't been here 5min's and already asking questions
Deceided to lower the Disco by an inch so that I don't get earache from SWMBO, I got the springs a while back and have been checking part numbers this morning just to be sure I did get the right ones.
Part No's NRC 2119 are the front springs and ANR 4491 are HD Rear
However according to Paddocks NCR 2119, well look at the page, you have to search for NRC2119 but then looking at Island 4X4 I'm now a bit confused. Also the front springs are about 1 1/2" taller than the rear is that normal.
P.S. should have said she currently has a 2" lift so I am now going to use Wizardbuilt excellent 1" spacers and standard height springs.
Ain't been here 5min's and already asking questions
Deceided to lower the Disco by an inch so that I don't get earache from SWMBO, I got the springs a while back and have been checking part numbers this morning just to be sure I did get the right ones.
Part No's NRC 2119 are the front springs and ANR 4491 are HD Rear
However according to Paddocks NCR 2119, well look at the page, you have to search for NRC2119 but then looking at Island 4X4 I'm now a bit confused. Also the front springs are about 1 1/2" taller than the rear is that normal.
P.S. should have said she currently has a 2" lift so I am now going to use Wizardbuilt excellent 1" spacers and standard height springs.
Last edited:
