Spotlight wiring kit

Hi Guys,

I got 4 rectangular halogen spots when I bought my roof rack and I should now have all the correct wiring etc. However after nodding in acknowledgment throughout the conversation with the man in the garage, I have now forgotten the layout, (typical bloke).

I have attached a photo of all the components. I have 4 spots and plan to mount two at the front and two at the back. I have two relays, two toggle switches (one for the front two and one for the back two), three straightline fuses (1x10 amp, 2x15amp), a selection of wires and connectors (male and female) and plan to run the cables under the roof rack, down the door pillar and in through the engine bay.

I was going to write down what I thought was the correct layout, but I will no doubt confuse myself and others by doing so.

If someone could be so kind as to let me know (in laymans terms!) the layout that would be fantastic!

Many thanks and appologies for my complete lack of knowledge on such a knowledgable forum! (but I am getting there!)

Adam

google can be very useful sometimes

What Wattage lamps are they? If they are standard 55w then this diagram should do you. 1 for each pair.

you could prob place the relays side by side in the engine bay and take 1 feed from the battery splitting it at the relays. then run one bit of conduit up the pillar to take the wires to the front and then the back. This should be neater then.

G

yes they are 55w and that diagram should do fine thankyou!

Adam

Also what if the switch has two terminals. It looks like I would need three in your diagram?

Adam

solved!