Spot lamp & wiring

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Steve555Y

New Member
Posts
53
Location
West Sussex
Hi all
I am trying to put some spot-lamps onto my Freelander 2005 TD4 facelift. I have drilled the bumper to put spot-lamp on. Do the little air grills come off and how. Do not wish to take the hole bumber off know body to help me. If I coud find a way of taking just one of the three grilles of i then could do the back nuts up on spot lamps and run the wires. There got to be a way of doing this without taking the front bumper off. Land rover do not make thngs easy? :doh:
Regards Steve
 
I'm not aware of any way of doing this without removing the bumper and when I did mine, as I mounted onto box section I had to use nutserts to bolt into (no access to put nut on back). Getting bumper off was a drag (be prepared for lots of WD40 and the odd hacksaw blade); putting it back on was a breeze, but I had the foresight to get some replacement screws and spire clips.
 
You must log in or register to reply here.

Similar threads

Swl26
Freelander 1 Driving Lamp Query
Replies
8
Views
1K
Dar ran Dar ran
Dar ran Dar ran
D
Disco 2 Facelift D2, bonnet and bumper end cap
Replies
1
Views
275
Landmark2
Landmark2
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
0
Views
459
Alex1000
A
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
16
Views
1K
Alex1000
A
tweedandbriar
Defender 110 Light Bar Wiring Question
Replies
19
Views
745
tweedandbriar
tweedandbriar
Back
Top