batfink001
New Member
- Posts
- 27
- Location
- West Sussex
Hi all,can anyone tell me how to release the cable from the gearbox end. looked in the haynes manual and all it said was, release the cable from the gearbox. Great help not.:doh:
speedo cable help needed
- Thread starter batfink001
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
batfink001
New Member
- Posts
- 27
- Location
- West Sussex
It was rather funny when i took it, was in drunken mode. you got to admit it is the k9s testies.lol
lets see if i can find one of my landy, desperate for a speedo now, as ive just put 3.5 v8 in it
lets see if i can find one of my landy, desperate for a speedo now, as ive just put 3.5 v8 in it
batfink001
New Member
- Posts
- 27
- Location
- West Sussex
Avitar removed, will find one later, any help?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
you need to slacken the bolt imediately above the speedo cable (take centre seat/cubby box out for access) once it's slackened off a bit the clip jolding the cable in just lifts straight up. It's horseshoe shaped. and the cable will come out.
batfink001
New Member
- Posts
- 27
- Location
- West Sussex
Cheers matey, off to sort it.
