So how the f**k do you fit new pedal pads

All my pedal pads are pretty worn, so I ordered a new set from britpart which have arrived today and just look like plastic squares basically???
The accelerator arm is just the piece of metal, is there supposed to be something that wraps round the metal accelerator arm to fit a plastic pedal pad onto??

Post of photo of the pages you ordered.

Are they the ones that have a recess that then slides on the pedal? If so put them in hot water for a bit to soften them.

This is the set.
I currently have nothing on my throttle just the metal arm leading into the bulk head. Looks like I’m missing something to attach the pedal to?

Throttle pedal should have a flat metal plate on the end that the plastic hobby clips over (warm first, or they snap).

karlp606 said:

This is the set.
I currently have nothing on my throttle just the metal arm leading into the bulk head. Looks like I’m missing something to attach the pedal to?

Click to expand...

the throttle pedal should have a flat plate on the end about the same size as that pedal rubber. Has it snapped off?

Looks like Im missing the plate :/

karlp606 said:

Looks like Im missing the plate :/

Click to expand...

My pedal. With/without rubber pedal

Sorted it thanks guys! I was been a dohnut - all new pedals now fitted.
Onto fitting the new wing mirror covers now

karlp606 said:

Sorted it thanks guys! I was been a dohnut - all new pedals now fitted.
Onto fitting the new wing mirror covers now

Click to expand...

Was you looking in the passenger footwell

Hicap phill said:

Was you looking in the passenger footwell

Click to expand...

spat my tea out you bellend

So how the f*ck do you fit new wing mirror covers lol

karlp606 said:

So how the f*ck do you fit new wing mirror covers lol

Click to expand...

why fit door mirror covers?? std units are perfectly fine. if wanting new door mirrors buy with convex lenses, they give a wider view and are excellent

Got some new black shiny ones that came with the car to replace the dull grey ones and ones missing the outer rubber seal. Also both are stiff as a board dont think theyve ever been moved on the ball joint, I take it you take the wing mirror heads off first from a bolt underneath? Then take the arms off...?

https://www.ebay.co.uk/itm/RDX-GLOS...hUwaO9gD5W7YNMLMH1KDELWjo_hTVDOxoCTSQQAvD_BwE
Think these are them... Looks like they just slip under the mirror housing rubber

karlp606 said:

I take it you take the wing mirror heads off first from a bolt underneath? Then take the arms off...?

Click to expand...

Yes, undo the Allen bolt underneath...if it will let you - they rust rock solid and the ball clamp rust out the door mirror internal frame. You may like to rethink the mirror covers, they a bit chav tat.

Just buy these, they're cheap to buy https://www.ebay.co.uk/b/Land-Rover-Defender-Wing-Mirrors-Accessories/36682/bn_1252658