Small dent removal?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

natas

Well-Known Member
Posts
1,434
Location
Bahamas
I have a few small dents here and there on Pumkin.

Is it possible to tap them out or is there another method?

Thanks.
 
I pulled a few small dents out using a glue gun and some thickish dowel. put hot glue on the dowel place dowel in center of dent leave to dry (takes seconds) and pull off the paint doesnt come with it and it will get the dent out. If its not perfect first time just keep doing it ... Worked for me on the Disco,

W
 
My dent removal guy will do Defenders. The last one l used wouldn't.

He removed half a dozen small dents, three on the top of the O/S wing, one above the headlight, and one on the side of the front wing, for £20.

ln the three months since then l have somehow gained another two dents on the top of the N/S wing and one in the front panel, so l guess l need to either a/ call him again or b/ forget it
 
Last edited:
A rubber toilet unblocker ( plunger ) will do the job as long as the sucker will cover the dent, done this hundreds of times on cars but normally on landy's you leave them there as it ads carecter :)
 
Yes I would be interested to see where your dent guy is as he sounds great value.

Can these guys remove dents on the curved surface of the door as that's where the majority of my dents are.
b28f6f03e87f0e4857047a7d574d6e3f.jpg
 
I will ask him if he wants extra Land Rover work. But he is based in Stockport, Cheshire so l am guessing he won't travel that far from there.
 
Is it very difficult to change the door skin?

Not that I am going to do it but perhaps when its time for a re-paint.
 
Back
Top