Sills post anyone

Any one out there seen a post on how to replace sills with photos preferably.

You don't wanna do that the photos will just get wet and fall off. Paper Mache is much better.

dont know if this link will work but try it, one I posted on lr4x4
weld in disco sills/rock sliders - LR4x4 - The Land Rover Forum

If you want to make your own, the secret recipe is 1400mm of 60 x 120mm box section. This will fit like a glove if you follow the same method as the above link.
Be prepared to do some extra patching once you start, five door models tend to rot at top of rear wheel arch, (look with door open), and check that point from under side. Also, footwell floors can be a bit of a problem but this tends to be more with classic rangeys. Reckon on about 5 hours each side if you've not done them before and doing it on a driveway!

And don't forget to take all the carpets & wiring up before you start grinding or welding.