Setting/install steering blinker assemblywith s

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Seaswood

Active Member
Posts
194
Location
Falmouth New England
after getting the wrong blinker lights, washer wiper switches I got the correct switches for 90-87 model.
Thinking they were all the same I ordered from fiche of earlier 110.
But with switches installed there is a mechanism in the center (blue) that needs to be with arrow towards blinker switch & slots lined up to accommodate arms on steering wheel.
Once doing this the instruction is to Lock Steering, here is where I am lost?
As the blue center does not lock that I can see anyways.
Does this mean turn wheel to be locked in one direction against steer lock?

I got this to work but steering wheel was not centered, took apart again & got steering wheel centered but would not cancel blinker corectly?
 
Back
Top