series 3 Inner wings

Ok, I am new to Landy ownership but do love it, anyway i have noticed a banging noise from my n/s f and couldn't work out what it was, turns out that my inner wing is hanging on by a thread, but how do you attach a new one, surely if you rivot it on you have rivots through the top of your wings and welding must surely take the paint off!

So 2 questions where do i get 2 new inner wings and how do i attach the things!

Thanks in advance

not sure if the s3 is the same as an s2
but there should be a piece of angel on the underside of the wing
it will bolt to that, the foot well and the side of the innerwing on the inside nearest the engine
as for where to get them just make them they arnt very complicated its just a sheet of alli or steel with a few small bends and some mounting holes
if you dont want to or cant make them then try paddocks im sure they will send you in the right direction

Those brackets spotwelded to the underside of the wings do tend to corrode away. There might be enough left of it left to drill a couple of new holes with matching holes drilled into the mudshield. Otherwise a few rivets on the wing top don't look too out of place unless it's a super original Landy.