Series 3 galvanised chassis with Zeus disc brakes

damsmithy · May 7, 2014

gauging interest for a 88 inch series chassis was brand-new 2 years ago from richards chassis with parabolic leaf springs all round and pro comp shocks and fully rebuilt axles and lift shackles , the front axle is also fitted with the zeus brake disc conversion ,they will need new discs and pads which in total would cost £150 to replace from zeus , would like to sell the whole lot as one but will break for the right price and if it all goes at the same time , 1500 for the lot or onvo
this won't be able to be bought until the weekend after next as the vehicle is still complete pm with any offers or questions many thanks dan

Chris W · May 7, 2014

damsmithy said:
gauging interest for a 88 inch series chassis was brand-new 2 years ago from richards chassis with parabolic leaf springs all round and pro comp shocks and fully rebuilt axles and lift shackles , the front axle is also fitted with the zeus brake disc conversion ,they will need new discs and pads which in total would cost £150 to replace from zeus , would like to sell the whole lot as one but will break for the right price and if it all goes at the same time , 1500 for the lot or onvo
this won't be able to be bought until the weekend after next as the vehicle is still complete pm with any offers or questions many thanks dan

£1,000.00 :d

fanatic · May 7, 2014

Why would you break it? Seems strange

b20wnx · May 7, 2014

Seems more complete than my daily driver, wish I had the funds

flat · May 7, 2014

fanatic said:
Why would you break it? Seems strange

this.

whats wrong with it?

damsmithy · May 7, 2014

flat said:
this.

whats wrong with it?

nothing ? going to a coil sprung chassis ?

wickford90 · May 8, 2014

What series ? very tempted.

fanatic · May 8, 2014

wickford90 said:
What series ? very tempted.

Tax exempt coiler?

damsmithy · May 8, 2014

wickford90 said:
What series ? very tempted.

Series 3 and no not building a ringer just using a fender chassis and plates with series panels

wickford90 · May 8, 2014

damsmithy said:
Series 3 and no not building a ringer just using a fender chassis and plates with series panels

Shame it's a S3 chassis, if it were a S2 it would have been hard to keep the cash in my pocket.

damsmithy · May 8, 2014

There the same are they not !?

damsmithy · May 8, 2014

wickford90 said:
Shame it's a S3 chassis, if it were a S2 it would have been hard to keep the cash in my pocket.

just had a look britpart list series 2/3 chassis are listed the same so you can get that cash out your pocket !

richards chassis website say there the same but the s3 had more bracing ?

damsmithy · May 8, 2014

damsmithy said:
just had a look britpart list series 2/3 chassis are listed the same so you can get that cash out your pocket !

richards chassis website say there the same but the s3 had more bracing ?

i lied s3 have a different handbrake mount to an s2 i have been informed !

major truma 2 · May 8, 2014

wickford90 said:
Shame it's a S3 chassis, if it were a S2 it would have been hard to keep the cash in my pocket.

same chasssis ,near enough ?

damsmithy · May 8, 2014

Series IIa

major truma 2 · May 8, 2014

damsmithy said:
i lied s3 have a different handbrake mount to an s2 i have been informed !

.it has the hole in side of chassis to mount series 2 hand brake,they are the same chassis ,im useing a s3 chassis now for a s2a rebuild ,and no probs at all

wickford90 · May 8, 2014

damsmithy said:
There the same are they not !?

Mines an early S2, what have you rebuilt on the axles, is the chassis painted,
sods law i have just bought a recon front axle and bought and refurbed 11" front drums and back plate so some of the bits will end up being surplus.

damsmithy · May 9, 2014

All bearings seals and drums/slaves / chrome balls all steering rods also has rrc diffs in as well do have original diffs to go with chassis is unpainted and axels were powder coated in black looks loverly

damsmithy · May 9, 2014

However I have cut the battery tray off as it did have a Tdi sat in there but standard series mounts

Bump · May 9, 2014

Have you got some pics?

How quickly do you need it actually gone? would you accept a reasonable holding deposit and store it for a bit or does it need moving asap?

Series 3 galvanised chassis with Zeus disc brakes

Active Member

Well-Known Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Active Member

Well-Known Member

Active Member

Active Member

Active Member

New Member

Active Member

New Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Similar threads