series 3 2.25 crankshaft cap bolt torque
- Thread starter dwdw
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Is this main bearings or big ends?
In any case, I would go with what it says in the genuine manual.
steve2286w
Well-Known Member
- Posts
- 4,576
- Location
- monkeyangerland
http://www.retroanaconda.com/landrover/2010/03/series-iii-workshop-manual/
This normally useful but confirms 85 for 3 bearing and 100 for diesel
Don’t think it would harm having 85 on the 5 bearing
This normally useful but confirms 85 for 3 bearing and 100 for diesel
Don’t think it would harm having 85 on the 5 bearing
steve2286w
Well-Known Member
- Posts
- 4,576
- Location
- monkeyangerland
All revealed in the 5mb engine supplement at the back of above manual , …..it depends on engine serial number to use the higher torque
Bobsticle
De Villes Advocaat
- Posts
- 27,632
- Location
- Manchester
I’d go right ruddy tight. Swat I did on mine and it ain’t fell off.
Its the main bearing.
Many thanks to all, looks like its 85ftlbs for petrol & 100 ftlbs for diesel.
steve2286w
Well-Known Member
- Posts
- 4,576
- Location
- monkeyangerland
Similar threads
