Hi. I have a twin cylinder compressor that I want to install on the P38 and I was wondering if it's possible to somehow connect it to the pressure switch inside the valves block and work in parallel with the stock compressor. I would like a fully automated OBA system for inflating tyres, pneumatic tools, etc. and I wouldn't like to stress the original compressor too much.
Second Compressor working with EAS
- Thread starter deadnoise
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,309
- Location
- Buckinghamshire, UK. ('95 DT)
@martyuk has done this. No write up here. He's martynz on rr.net and I know he frequents another forum but cannot remember which one.
Datatek
Well-Known Member
- Posts
- 45,018
- Location
- Near Poitiers SW France
Just keep your tyre inflater in the boot and leave the EAS alone. The relay that operates the standard compressor will not operate an additional compressor.
- Posts
- 58,170
- Location
- Preston Lancs.
+1.
Similar threads
