1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Series 2 SEAT BOXES

Discussion in 'Series Land Rovers' started by ciderman, Aug 4, 2020.

< Previous Thread | Next Thread >
  1. ciderman

    ciderman Active Member

    Joined:
    Oct 1, 2007
    Posts:
    721
    Likes Received:
    41
    Location:
    sunny worcestershire
    HI, does anybody have indepth knowledge of seat boxs? Is the 90/110 seatbox same as series?
    can you fit a 90/110 under seat box to a series seat box? or do i use plywood as before?
    Thanks
     
  2. dag019

    dag019 Well-Known Member

    Joined:
    May 18, 2014
    Posts:
    3,133
    Likes Received:
    1,245
    Location:
    Warwick
    I do not know if they are the same, I know that the tunnel fitting is different to accommodate the change in gearbox but am not sure about the under seat boxs. However, I would not be using plywood have a look at YRM (link) they look to have all of the panels needed for a series seat box refreshment. I used them when I did the seat box in my 110 and cannot fault the quality and craftsmanship of their parts.

    Edit: on looking at the yrm site it appears that the underseat boxes they sell are the same part for both series and defender which may answer your initial question
     
    Hicap phill likes this.
  3. ciderman

    ciderman Active Member

    Joined:
    Oct 1, 2007
    Posts:
    721
    Likes Received:
    41
    Location:
    sunny worcestershire
    ok, thanks
     
< Previous Thread | Next Thread >