ging360
Active Member
- Posts
- 162
Right oh guys well I have found a replacement gearbox but my now significant problem is most of the seat box and surrounding area is going to disintegrate when I take it out.
So it seems a new seat box back angle strip, seat box ends, striker panels, I'm thinking that while I'm at it I will do the under seat tool box and the front angles where the floor attaches.
The area where the fuel filler goes through needs repair as well as dose the under side of that bit. YRM dose repair sections for these areas for defenders. Dose anyone know if they will fit a series or if anyone dose them for series Landy's. Thanks in advance pictures of what I'm on about are below.
There is one bit of good news though it passed it's mot on Monday with only one advisory for oil leaks.
So it seems a new seat box back angle strip, seat box ends, striker panels, I'm thinking that while I'm at it I will do the under seat tool box and the front angles where the floor attaches.
The area where the fuel filler goes through needs repair as well as dose the under side of that bit. YRM dose repair sections for these areas for defenders. Dose anyone know if they will fit a series or if anyone dose them for series Landy's. Thanks in advance pictures of what I'm on about are below.
There is one bit of good news though it passed it's mot on Monday with only one advisory for oil leaks.
