Seat Belts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

border

Well-Known Member
Posts
3,517
Location
North East. UK
Something Ive just thought about, I have no Front Seat Belts . I do have the bits that bolt on to bottom where belts clip in to, but don't have the belts themselves.
Stupid Question but would belts from Disco 1 fit ?
 
Whats it for? If it has the brackets down between seatbox and door throw them away and buy the belts with the belt fixing point on the inertia reel bracket.
 
For Defender 110 , will send pics of the bits I have later.

I think with yours being the 110 Van, it shares the same seatbelts as the 90. I’m quite sure they are the same. From memory, it needs the type where the inertia reel has the other end of the belt attached to it, not like my 110 that the inertia reel and the end are bolted separately.
 
Just checked the parts book. I’m not sure which one it’s supposed to have now?

this is the type I have in my 110CSW, but I don’t think you have the mounting points for this as the rear bulkhead is in the way.
upload_2020-6-26_19-33-46.png


I think this is the type you need, but check your VIN and see if it matches up.
upload_2020-6-26_19-35-22.png


upload_2020-6-26_19-35-49.png
 
Just checked the parts book. I’m not sure which one it’s supposed to have now?

this is the type I have in my 110CSW, but I don’t think you have the mounting points for this as the rear bulkhead is in the way.
View attachment 213292

I think this is the type you need, but check your VIN and see if it matches up.
View attachment 213293

View attachment 213294
Thanks Bloody forgot to take pics , all I have is the bits that bolt to floor where belt clips in to, will get a better look tomorrow. This one should be straight forward once I know which bits I need.
Isn't it funny, you solve one big problem then think your flying now, Then more crop up straight after Found another couple of problems along the way which I didnt notice before.
Will post them up in a bit, well One at a Time anyway :)
 
Has anyone got Photos of how seat belts are Mounted in 110 Van ?
Think I've found mounting points for the bottom, in Micks diagram, but not sure which Bracket I need for above.
 
It uses 2 roof bolts.
Unsure if you drill holes to suit
I try and find pic coz knowing me Ill pit them in the wrong holes.
Think I know which Seat Belts to get now for these, Im sure these are mounting points for the bottoms on mine.
 

Attachments

  • IMG_20200703_153912.jpg
    IMG_20200703_153912.jpg
    201.1 KB · Views: 67
Back
Top