Scratching my head

Hello, new member here!
The missus has brought a 55 reg landrover freelander MK1 TD4 HSE mainly to run the pooch around in. Its not without some minor issues as to be expected for its age, so naturally its a bit of a project for me.
Yesterday I was giving it a quick pressure wash to get the thick mud off and noticed the ringlight around the ignition barrel was on. Then noticed the interior cab lights and luggage light was on. When push the switch on the main interior light it's just on both ways on the switch. It only goes off when you hold the switch half way in. But, the rest of the interior lights stay on. When all doors are shut, the "door open" light goes off on the dash display. It's my job to have a look at tomorrow so it'll sit on the drive tonight with its lights on again! I'm a little bit stumped until I get into it so just wondering if anyone has any suggestions of where to start?

Hi and welcome

Hi, welcome, sorry can't help with your question, might want to ask in the freelander section of the forum, someone there will more likely help you out.

Steve

Pressure washing inside? hope you get to the bottom of it,

Hello and welcome

Welcome.to landyzone. I dont think Id be brave enough to pressure wash a freelander 1. Mine used to collect rainwater in that cubbyhole in the floor of the boot. It will only be a matter of time before you get a call from the wife to say she cant open the back door to get the dog in/out. I had an issue where the interior lights wouldnt go out, my solution was to remove the bulb. I think the fault was with one of the door switches staying connected even with the doors shut. If you post your problem on the freelander part of the site, one of the experts will give god advice.

Col