Saying hello and a first question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

TeamLandy

New Member
Posts
7
Hi,

I've just joined and thought I'd say hello.

I have a 1959 Series II - got it about eight months ago and it's in pretty good condition having been rebuilt on a new galvanised chassis in the mid nineties. Generally reusing original parts. It's been great so far, subject to the usual maintenance of running a 51 year old car. I live in the Chilterns near Great Missenden and I use it as a hobby car but give it plenty of jobs to do.

I got caught out in the snow recently though, the car drove perfectly but the windscreen wiper (note the singular) was found seriously lacking - in fact I had to stop if it snowed because it just wouldn't clear the stuff.

The problem seems to be lack of pressure holding the wiper against the screen, bending the arm made little or no difference. It seems to me I needs a meatier wiper blade & spring but I'm guessing the motor will then struggle. I wonder what any of you seasoned Landy drivers have done to overcome this problem - any advice will be very gratefully received.

Thanks

Steve
 
OK Getting dark but here's two quick snaps

I think the photos are attached

Steve
 

Attachments

  • DSC03727.JPG
    DSC03727.JPG
    38.3 KB · Views: 116
  • DSC03728.JPG
    DSC03728.JPG
    51.8 KB · Views: 142
Could be the spring in the arm is a bit kacked or the joints are stiff - try a new arm.
 
Back
Top