Rust treatment
- Thread starter fazer1967
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ronsealdeath
Sagging Member
- Posts
- 1,851
- Location
- Swansea, Wales
Fertan is good. Some like jenolite or dinitrol stuff. All good. Hammerite good for very mild surface rust but nothing more than that. Wire brush and degrease first.
Saltlick
Well-Known Member
- Posts
- 1,082
- Location
- Taunton, Somerset
Another vote for Fertan, plus it smells great 
Paint over it after second application has dried and that'll be it for a good few years..
Paint over it after second application has dried and that'll be it for a good few years..
pussa13
Active Member
- Posts
- 160
- Location
- Leyburn North Yorkshire
I use Fertan, I think it's about the best!
SpaceDawg
Active Member
- Posts
- 935
- Location
- Cowfold, West Sussex
Fertan, but remember its not going to fix the rust.
Then zinc primer and paint.
Then zinc primer and paint.
Its looking like Fertan then, I'm planning on attacking any light to medium rust areas with a wire brush and then a rust treatment, covered by hammerite or some such thing. On initial inspection, the car seems to be surprisingly rot free, which is why I bought of course, the rest of it is a bit rough tho
Thanks for the replies chaps
, I'm planning on attacking any light to medium rust areas with a wire brush and then a rust treatment, covered by hammerite or some such thing. On initial inspection, the car seems to be surprisingly rot free, which is why I bought of course, the rest of it is a bit rough tho Thanks for the replies chaps
