Rust in A and BC posts
- Thread starter pauli
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Beast o Bodmin
Banned
- Posts
- 17,157
burn it..
have you looked under the carpet....??
have you looked under the carpet....??
Make sure the outside of the bottom of the posts are water tight otherwise the footwells will get flooded. I have the same with mine - tis the last bit if welding I have left after doing rear floor, both inner wings, front passenger side footwells et. al.
Beast o Bodmin
Banned
- Posts
- 17,157
you might get lucky and find this...
Hi all
Did a search on this but there is so much stuff its confusing.
1995 300tdi
Rusty hole in bottom of drivers side A and BC posts.
Can these just be filled or is there a water drain in them somewhere
Sorry if this has already been covered
The holes need to be clear or the A post fills with water. The same happens if they get blocked, which happens quite easily as the holes are a bit small.
Like the other poster says, best to get an idea of the overall condition before you dive in. Whats the inner sills, boot floor and rear cross member like? Oh and inner wings
trax99
Well-Known Member
- Posts
- 1,149
- Location
- Montgomeryshire
Fookin hell beast, ta you've made me day, I thought mine was bad, it took me a while to work ouy which bit is was, wow, phew and so on
300TDI-Disco
New Member
- Posts
- 135
If its a small hole in the post - kill the rust and epoxy putty
If its any bigger - a gallon of 4 star and a box of swan vesta
If its any bigger - a gallon of 4 star and a box of swan vesta
Similar threads
