RRS rattling noise from engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi John
Welcome .
I don’t know your level of expertise but if you chasing a possible leak in the manifold. Put compressed air up it’s back passage(sealed with an old bike inner tube) and spray all along the exhaust with soapy water from a garden sprayer. If there are leaks there will be bubbles . But don’t get over giddy
Or get someone to hold a rag over the end of the exhaust with the engine running.
 
Hi John
Welcome .
I don’t know your level of expertise but if you chasing a possible leak in the manifold. Put compressed air up it’s back passage(sealed with an old bike inner tube) and spray all along the exhaust with soapy water from a garden sprayer. If there are leaks there will be bubbles . But don’t get over giddy
Or get someone to hold a rag over the end of the exhaust with the engine running.
 
Hi John
Welcome .
I don’t know your level of expertise but if you chasing a possible leak in the manifold. Put compressed air up it’s back passage(sealed with an old bike inner tube) and spray all along the exhaust with soapy water from a garden sprayer. If there are leaks there will be bubbles . But don’t get over giddy
Or get someone to hold a rag over the end of the exhaust with the engine running.
 
Hi John
Welcome .
I don’t know your level of expertise but if you chasing a possible leak in the manifold. Put compressed air up it’s back passage(sealed with an old bike inner tube) and spray all along the exhaust with soapy water from a garden sprayer. If there are leaks there will be bubbles . But don’t get over giddy
Or get someone to hold a rag over the end of the exhaust with the engine running.
 
The site has been playing up since yesterday evening, just press refresh rather than keep pressing post its just going slow the hamster is on his last legs.
 
Hi I own a 2007 Range rover sport, 2.7tdv6 l320. recently has developed a tapped sound under load, sound like slack tappet rattling. Anyone any idea what it could be, and how to fix it. engine still strong no loss in power and returns 32mpg, noise is bugging me thanks

Hi guys, thanks for all the advise. Turns out the noise was the auxiliary belt tensioner, was moving back and forwards, and causing a rattle. The pulley was starting to stick, so now the job of trying to release the viscous fan nut
 
Back
Top