rrc eas..please can you confirm or otherwise...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

zen

Well-Known Member
Events Planner
Posts
2,602
Location
london
reading the landrover manual etc it appears to read that height settings will change even if inhibit and disable switch are enabled..though it is abit unclear.

ie it will drop from standard height to motorway height?i need to disable this if it will for the time being..(easy done,remove speedo sensor input to ecu)

also...if valve block,springs,fittings etc are in good order how often does the compressor run in an average journey??

thanks
 
In my experience, once the inhibit switch has been operated, the ride height will not change at all.
It's hard to gauge how often the pump runs, again in my experience, it runs a lot around town (maybe for about 20 seconds every few minutes), but very little on the motorway (never notice it running at all).
Hope this helps!
 
In my experience, once the inhibit switch has been operated, the ride height will not change at all.
It's hard to gauge how often the pump runs, again in my experience, it runs a lot around town (maybe for about 20 seconds every few minutes), but very little on the motorway (never notice it running at all).
Hope this helps!

Weirdly, I think mine is the same! No idea why it runs so often round town or sat in traffic.
 
Back
Top