going to fit air suspension on my old 2 door...(lower height for high speed and up in the air for other...)
now i have most of the kit removed from another rangie...will not be using tired springs or rrc ecu but aftermarket types..(dakota digital and proberly arnott ind. gen111 springs..)
but..what bits do i need to afix the air springs to axles and chassis spring "hangers"...
i can see it afixes via 2 pins on the upper and lower ali air spring mounts and is held in place by clips, but does anything (i know it does) go inbetween spring and chassis/axle...i assume i need different mounts on axles??
i have front turrets etc to remount shockers but its just the spring mountings am unsure about..anyone got a dia from workshop manual?
thanks.
now i have most of the kit removed from another rangie...will not be using tired springs or rrc ecu but aftermarket types..(dakota digital and proberly arnott ind. gen111 springs..)
but..what bits do i need to afix the air springs to axles and chassis spring "hangers"...
i can see it afixes via 2 pins on the upper and lower ali air spring mounts and is held in place by clips, but does anything (i know it does) go inbetween spring and chassis/axle...i assume i need different mounts on axles??
i have front turrets etc to remount shockers but its just the spring mountings am unsure about..anyone got a dia from workshop manual?
thanks.
