Rrc 4.6 rpi

frizzoboy · Dec 15, 2009

Hello,

after a water issue with my 3.9 EFI, i'm replacing the engine with a RPI 4.6 engine with max torque cam and rechipped ECU.

my question is will this work with my standard exhaust?
and what is the best system to replace it with and where to order in uk online?

thanks for your advice.

greetigs from belgium.

SpudH · Dec 15, 2009

Seems a waste to get that sweet tuned motor and run it through a standard exhaust. I'd be fitting something just to release some of that V8 music alone! :doh:

I've that cam in my 3.9 and it makes a lovely difference in torque. I've a SS exhaust with a straight through back box. Not noisy at all but just enough woofle to make the Civic VTEC boys go green! :smokin:

frizzoboy · Dec 16, 2009

SpudH said:
Seems a waste to get that sweet tuned motor and run it through a standard exhaust. I'd be fitting something just to release some of that V8 music alone! :doh:

I've that cam in my 3.9 and it makes a lovely difference in torque. I've a SS exhaust with a straight through back box. Not noisy at all but just enough woofle to make the Civic VTEC boys go green! :smokin:

i've been thinking about a SS exhaust, did you have a problem fitting it and can it pass the starter engine?
on a forum i read there were some quality issues with these exhaust.

Rrc 4.6 rpi

frizzoboy

New Member

SpudH

Well-Known Member

frizzoboy

New Member

Similar threads