rover P5 engine question
- Thread starter stt
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
zzr1200
Well-Known Member
- Posts
- 1,862
- Location
- Chesterfield, Derbyshire
I can't see a reason why it shouldn't be, the only difference I can seem to remember is the 2.6 has 1 carb and the 3.0 has 2 carbs, but it is years n years since I've seen a 6 cylinder Landy, so I could be talking total bo*****ks.
No real help then......
No real help then......
tacr2man
Well-Known Member
- Posts
- 3,926
- Location
- J10 M40 UK
The Weslake head on either the 2.6 (Rover P4 110 engine) or 3 litre won't fit without modification to the clutch pedal box. However, the early non-Weslake 3 litre drops straight in." HTSH
tacr2man
Well-Known Member
- Posts
- 3,926
- Location
- J10 M40 UK
weslake head has seperate inlet manifold the other is integral with the head
chromiumuk
Well-Known Member
- Posts
- 2,203
- Location
- Earth
Ah the Rover P5, now there was a car...............
Mr-Tomcat
New Member
- Posts
- 1,104
- Location
- Anglesey, North Wales
Yes still a car to see now, and being copied all these years later, by Chrysler.
Andy.
Andy.
