Route of wiring to rear wiper/wash

1994 Defender 300TDi hard top

It looks like a previous owner has replaced the rear door. There is no wiring to the heated window and there is a basically chopped off bunch of wires to the wiper motor. I can sort it out but what would the normal route be of the wiring be as I might well find that it is chopped part of the way back to the switch.

Thanks......

on my CSW it joins the rear loom with the O/S lights, then goes down through as hole in the tub, and into the chassis, loom exits the chassis somwhere under the drivers footwell, its tracable from there (cant quite remember the route)

timtheenchanteruk said:

on my CSW it joins the rear loom with the O/S lights, then goes down through as hole in the tub, and into the chassis, loom exits the chassis somwhere under the drivers footwell, its tracable from there (cant quite remember the route)

Click to expand...

thanks