matt1295
New Member
- Posts
- 1,734
- Location
- Scarborough
hello going to get some roof racks/rails tomorrow for my 3 door but can anyone tell me what tools i will need to take/buy to go get them off the car please
Roof Racks fitting
- Thread starter matt1295
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Halfords do some good uns!! but no idea on specifics.
Last edited:
matt1295
New Member
- Posts
- 1,734
- Location
- Scarborough
no i mean the landrover ones as it stands my freelander has non at all lol
Yep t40 torx. 3 each side at the back (2 hold fixing bracket to car, 1 holding rack to bracket) and same again each side under the covers at the front (the front covers lift upwards to remove them)
Rear cross bar is held in place with 2 Allen screws either side (5mm Allen key)
Easiest to remove rack first then the brackets remembering which screws go where as they are different lengths.
Rear cross bar is held in place with 2 Allen screws either side (5mm Allen key)
Easiest to remove rack first then the brackets remembering which screws go where as they are different lengths.
Last edited:
matt1295
New Member
- Posts
- 1,734
- Location
- Scarborough
thanks mate thats what i needed to no 
Similar threads
Freelander 1
Boot Fish Tank
