stretchie_
Active Member
- Posts
- 476
- Location
- Gloucester
Hi all
Wondering if you have any ideas. I bought a second hand roof rack, don't know the make.
Unfortunatley two of the feet that wrap under the gutter and are then tightened up have had the bolt bent, so that when I tighten them up they end up bending out wards and come up/over the gutter.
I do not have a vice so can't get in in one and try to bend it back. It's basically a triangular bit of metal with a fold in the bottom to go under the gutter and an M8 bold welded to it which goes up and is bolted to the legs of the roof rack. I have arrowed them in the picture. Anyone know where I might be able to get some replacments?
Ta
Wondering if you have any ideas. I bought a second hand roof rack, don't know the make.
Unfortunatley two of the feet that wrap under the gutter and are then tightened up have had the bolt bent, so that when I tighten them up they end up bending out wards and come up/over the gutter.
I do not have a vice so can't get in in one and try to bend it back. It's basically a triangular bit of metal with a fold in the bottom to go under the gutter and an M8 bold welded to it which goes up and is bolted to the legs of the roof rack. I have arrowed them in the picture. Anyone know where I might be able to get some replacments?
Ta
), perhaps getting the old bolt cut off and new ones welded on to the gutter grip might be an option. Not too sure where to get spares from though
