Roof light bar

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
How about this one from Bolt on Bits...

$(KGrHqV,!k8FC3ZZTTG0BQvjBWUB7g~~60_12.JPG


Light Roof bar 6 Spot Lamps/Guards Discovery 1 & 2 200Tdi 300Tdi Td5 V8 CB Mount | eBay

PS - I don't work for them or know them - just their stuff is normally good ;)
 
If you are handy with wires and relays, yes!

You need a circuit for each pair of lights, using a 12v relay is the best way. I have mine wired to come on either with main beam, or on as separate work lights, or off altogether.

Got my switches on the top console:

normal_20131122_132203.jpg
 
I have all the cables hidden inside the light bar, you can sort of see in this pic how I have the wires coming out of the light bar into some bullet connectors (to make it easy if I ever need to remove the bar ;)) and then down into the cabin just above the drivers door....

normal_20131231_131622~0~0.jpg


All you need is some decent wire and few automotive 12v relays and some switches.

I have also drilled the lights and put in 2x LED's that come on with the side lights, and again have all the wiring inside the light bar for a nice and neat job - takes a lot longer, but worth it I reckon...

normal_DSC02620.JPG


they are not as blue/purple in real life - just the way the camera has taken the pic.

and this is it 'just' on side lights....(also put LED's in my front driving lamps too :D)

normal_DSC02616.JPG
 
Last edited:
Cheers, would love to but the 300 odd mile round trip puts me off - although I do like staying at Crewe Hall hotel which I don't think is far from your location
 
Sorted - you sort me and me mrs a couple of nights in there, and I'll wire in your light bar ;)
 
Last edited:
No worries, but all joking aside, if you need any pointers in wiring etc, give me a shout when you are fitting and will see if I can help, or point you in the right direction.
 
Back
Top