metallicachick86
New Member
- Posts
- 1,308
- Location
- Bury, Lancashire
Ok, this is for my dads 200tdi Disco....
When the engine is off, the reverse lights are fine no problem.
When it is on, they flicker really fast so you can barely tell. But when the accelerator is pressed they go back to static. It used to be worse, afew weeks ago they went out when the brake pedal was pressed but we checked the back of the cluster and cleaned it up abit, that seemed to stop.
So, i've checked the plugs to the cluster, there still earthed up, the 'tracks' on the clusters are in one peice and clean.
I've also been underneath and had a look the wires and contacts on the reverse switch, but i can't take it out so can't test that.
Would it be the switch? Or else any other ideas?
When the engine is off, the reverse lights are fine no problem.
When it is on, they flicker really fast so you can barely tell. But when the accelerator is pressed they go back to static. It used to be worse, afew weeks ago they went out when the brake pedal was pressed but we checked the back of the cluster and cleaned it up abit, that seemed to stop.
So, i've checked the plugs to the cluster, there still earthed up, the 'tracks' on the clusters are in one peice and clean.
I've also been underneath and had a look the wires and contacts on the reverse switch, but i can't take it out so can't test that.
Would it be the switch? Or else any other ideas?