Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Replacing the boot floor
- Thread starter Mr Alford
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I'm thinking of fitting a Bac Lightning engine in my series one disco if ya fancy doing us a quick guide.
im only doing guides of what ive done so far as i have only had my disco just over 2 months so im working my way through it as i go
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
2 months and ya've not got round to fitting a jet injin yet.
Bit of a late starter where ya.
2 months and ya've not got round to fitting a jet injin yet.
Bit of a late starter where ya.
just posting pics up for other peoples benefit if u think its a waste of time then say so
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Woah there mate rein it in. am just have a bit of the craic. I'm watching this floor project with bated breath. I've got ta do mine at some point.
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
Keep them pictures coming, the forum is the place for your enthusiasm of this great marque...
Right heres the progress with the stripped rear interior ive stripped it all out removed all the polystyrene rubbish that buffers around it now it looks like so
now you can see the holes i have to weld today
heres a couple pics of the waxoyling i have done front and rear parts of the chassis and the diffs plus steering parts then ill do the arches once and middle section once i have a high lift jack hammerite have brought out a new waxoyl range and its cheap as chips
now you can see the holes i have to weld today
heres a couple pics of the waxoyling i have done front and rear parts of the chassis and the diffs plus steering parts then ill do the arches once and middle section once i have a high lift jack hammerite have brought out a new waxoyl range and its cheap as chips
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Looking good I've just removed the rear seats on mine and fitted a sheet of 18mm ply to cover the full floor area all the way upto the back of the front seats. gives me a bit of hidden storage under the floor behind both front seats and leaves the load bay empty for all me tools/materials when I'm working.
i'm just starting on the same thing with my disco ....so keep the piccys comin ..i'v got most of the stuff together .
i just need to get the time to do it now ....i'v rebuilt the engine so thats ready to go back in , and i plan to strip the rear out as you have done ....just out of interest what size tyres do you have on ?? as i have a set on my 90 that i would like to fit to the disco but they are 33/1250/15 ..so it'll need some choppin .... i also plan a slight lift aswell so thats in the plan...
i just need to get the time to do it now ....i'v rebuilt the engine so thats ready to go back in , and i plan to strip the rear out as you have done ....just out of interest what size tyres do you have on ?? as i have a set on my 90 that i would like to fit to the disco but they are 33/1250/15 ..so it'll need some choppin .... i also plan a slight lift aswell so thats in the plan...
Not had chance to check on you rprogress this week, but it's looking good.
Just started stripping out my interior trim tonight, thankfully it's looking in good condition so far. Although I thought I was gonna go through a corner of the boot floor for a moment.
I've just waxyoiled my arches so now I can refer to your pics to know what other parts to waxyoil.
Keep the updates going if you get chance.
Teshu
Just started stripping out my interior trim tonight, thankfully it's looking in good condition so far. Although I thought I was gonna go through a corner of the boot floor for a moment.
I've just waxyoiled my arches so now I can refer to your pics to know what other parts to waxyoil.
Keep the updates going if you get chance.
Teshu
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
keep em comming alford!
got bored as i finished work early friday afternoon so i stumbled down to my local land rover shop and bought one of these high lit jacks, mounted it then hammerited the rear door completely as it had rust patches on the corners, again to my personal taste maybe not to others but i like it
did some welding tday heres the pictures did the rear passenger wheelarch and the rear driver internal wheelarch i hammerited them after and for one of them i used something called tetroseal underneath which is marvelous and cheap as chips
now with the tetroseal on
now this is a pic of the drivers side wheelarch
gonna rivet the plate that was nxt to it bk on
now with the tetroseal on
now this is a pic of the drivers side wheelarch
gonna rivet the plate that was nxt to it bk on
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
love the rear window sticker! "you can go fast, but i can go anywhere!" aint seen that before.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
love the rear window sticker! "you can go fast, but i can go anywhere!" aint seen that before.
Mine says "I only drive this way to **** you off"
RAZ8550TDI
New Member
- Posts
- 3,573
- Location
- liverpool
put me down for one of them too! lol
am onr fo those drivers who gets up through the gears quick and waits for the turbo to kick in before it accelerates lol
am onr fo those drivers who gets up through the gears quick and waits for the turbo to kick in before it accelerates lol
Similar threads
