Removing the dashboard

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

BenH86

New Member
Posts
7
Hi, am trying to remove the lower dashboard from my c reg 90. Have undone all the screws that i can see but it still seems firmly stuck in place as though its been glued! Does anyone know if there's a trick to getting them off in one piece or does it seem likely that its been glued in??
Me and my gf are having a minor domestic over it (she reckons it should just come off but im sure its been stuck in place or something!)
Any help would be much appreciated,
Ben
 
Maybe they are the concealed metal press studs
and you need to ease them away with a screw driver
so you don't tear them away from the dashboard

Just guessing.. just had my back door panel off that
had 4 or 5 including screws
 
which screws have you removed already?
there is quite a few.
but ffs dont try to rip it off until you are certian all the screws are out , other wise your gonna have a job putting it back.
 
Just a thought but you have taken the upper dash off first?

Heres a photo of what to expect when you get it off.

mouses nest resize.JPG

Well it could have been a cheese sarnie!!!!!!!!!!!!!!!!!!!!!1
 
Thanks for ure help, took the top dashboard of and undid every screw i could find but still couldnt budge it despite lots of screwdriver proding! lol bastard must've glued it in place!
 
i very much doubt its been glued in place , unless the previous owner was a half wit with an air fix fetish.
have a look on the engine side of the bulkhead , might be nut and bolted on.
either that or it might be sealed on with silicone.
 
Back
Top