Disco 3 (LR3) Removing drivers seat memory module

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

gstuart

D3 Grandad
Full Member
Posts
30,790
Location
Kent
hi

Retrofitted front electric seats and drivers seat came with a memory module, done a wire alteration which bypassed the memory module , these are normally fitted to HSE , mines a base model so extra wiring isn’t there, as the memory module will control, seats / door mirrors / electric steering column

After bypassing the memory module it only allowed a 2 x second burst of power at the switches

Done an investigation in what it would take to completely remove this

Got another loom and done some alterations to it and a 8 x way seat switch pack

Spent time identifying what colour wires went to what motor , 4 x motors are fitted for, forward/ backwards , up/ down, back tilt ,front tilt cushion up/ down

Finally got it all done, Hope it helps others that with a memory seat it can be completely removed and with some minor alterations have a constant powered seat

Also fitted my D4 steering wheel, just got to disconnect the battery again in order I can refit the steering wheel airbag and reconnect the seats airbag and reset the airbag system

C8E568D0-7321-42E3-A1D6-0616697A18AC.jpeg
F5364C33-C6FB-461C-8B5A-39FD63C2EC80.jpeg
15271A46-E82D-47FC-BD1C-32BFBC1C44FC.jpeg
22696A51-B01B-45D5-AB28-181CFE4263A6.jpeg
B6219AA4-9C55-4B4B-A386-792FFD84EC9C.jpeg
DE6C7EB9-82AD-417E-85EC-FA20531EED2F.jpeg
AEA4F384-84D0-4DBD-83B5-5B257BFA3EE5.jpeg
1E5B06C9-3F23-4AAA-B5A0-BF8F941829F5.jpeg
 
Back
Top