Disco 1 Removal of LPG System

Pieman95 · Feb 12, 2019

Hi all
Looking for a bit of info in remving my trucks lpg system. i have never done any work on an lpg system before i assume that there will be a NR V/V on the filler neck side to the tank what is there on the outlet side to stop gass flow. Also will i get away with just removing the 2 tanks and blanking all associated pipework from the tank, or will i have to remove the pipework and replace the inlet manifold and remove all the electronics.
Im not intending on putting the truck back on the road it will be getting used as a dedicated off roader

dieseldog69 · Feb 12, 2019

Pieman95 said:
Hi all
Looking for a bit of info in remving my trucks lpg system. i have never done any work on an lpg system before i assume that there will be a NR V/V on the filler neck side to the tank what is there on the outlet side to stop gass flow. Also will i get away with just removing the 2 tanks and blanking all associated pipework from the tank, or will i have to remove the pipework and replace the inlet manifold and remove all the electronics.
Im not intending on putting the truck back on the road it will be getting used as a dedicated off roader

Run it out and remove everything associated with the LPG, electronics and everything, no point leaving anything to confuse you later on.

What inlet manifold are you running?

Pieman95 · Feb 14, 2019

The truck has been stored in a shed and not been running for the past 10 years I have bought it and havnt has the engine started it needs a bit of welding in the cills and prefer to take the tanks off before I begin any welding work encase I end up taking off my eyebrows

Disco 1 Removal of LPG System

Pieman95

Member

dieseldog69

Well-Known Member

Pieman95

Member

Similar threads