Remote programming intructions

anyone try this

LANDROVER FREELANDER How to program the remote control locking/unlocking devices for a Freelander
Here are the instructions
You'll need the assistance of a friend or family member to depress and release the hood switch while you work from the driver's seat. 1. Starting conditions: ignition off, doors unlocked, hood switch depressed. 2. Carry out instructions 3. to 9. within 8 seconds. 3. Switch ignition to ON. 4. Switch ignition OFF. 5. Lock doors by pressing down on drive door lock. 6. Unlock doors by lifting up drivers door lock. 7. Release hood switch. 8. Switch ignition to ON. 9. Switch ignition OFF. At this point, if the alarm was correctly accessed, horn will sound and LED will light. It is now possible to program two handsets of correct frequency to vehicle alarm ECU. This must be carried out within two minutes. 10. Press and hold down button on first handset until dash LED flashes. 11. Repeat instruction 10 when dash LED flashes for second handset.
The LED will extinguish if both handsets have been programmed correctly

Dunno where you got that from,but its the instructions for the old single button type fobs on RR classics/disco 1's. For a Gaylander you need Testbook.

plus on hippo's you can have up to 5 devices

Universally_Challenged said:

plus on hippo's you can have up to 5 devices

Click to expand...

4.