- Posts
- 1,696
- Location
- towie hell
recovery eyes
- Thread starter pressbrake
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
Can I have on in black to match my hd disco bumper??
If so mememe il have one please
If so mememe il have one please
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
Can I have on in black to match my hd disco bumper??
If so mememe il have one please
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
PHP:
But if I'm going to buy one I might as well ask the question if they come in black!
You don't buy a dog and then bark yourself!
- Posts
- 1,696
- Location
- towie hell
Not painting at that price! In primer is as far as I'll go!
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
i didnt say i wasnt willing to pay more for it. i just asked if it was an option
- Posts
- 1,696
- Location
- towie hell
I wasnt offended Im trying to think of options whilst keeping it under half the price but stronger than others available .
Im trying to think of options whilst keeping it under half the price but stronger than others available .DieselDisco
New Member
- Posts
- 256
- Location
- York
what thickness is the plate, are you sure they're gonna be strong enough to take the weight ov a landy with another one tucking at it ?
- Posts
- 1,696
- Location
- towie hell
12mm thick plate(terrafirma 8 or 10mm) with 20mm round solid bar, so good for 30 tonne as far as material uts goes so a lot stronger than the chassis
- Posts
- 1,696
- Location
- towie hell
kev224
New Member
- Posts
- 77
- Location
- South Wiltshire
Hi, just wondering what the hole diameters were and at what centres they are at. I'm looking to fit one to a series 2.
Cheers
Kevin
Cheers
Kevin
- Posts
- 1,696
- Location
- towie hell
Theyre standard defender hole positions ,the bottom 2 and top 2 holes on the x member. Its been a long time since Ive been near a series so I cant remember if theyre the same!
thanks
thanks
- Posts
- 1,696
- Location
- towie hell
thats a dodgy tat
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
Il av one matey
- Posts
- 10,639
- Location
- Oxfordshire
just a suggestion. next time you take pics, it could be useful to take them next to a frame of reference, like the bumper. It's a bit hard to tell if its on a tshirt
*cough* nm, seems I didn't click and look at the second page
*cough* nm, seems I didn't click and look at the second page
- Posts
- 13,800
Is it just me, but I think Bella really could do with investing in a good manicure
Just going to check that the hole in my crossmember isnt near the tow bar point before I order one
Just going to check that the hole in my crossmember isnt near the tow bar point before I order one
I have wondered about taking the tow bar off if I go laning as its the lowest point.
Not questioning the quality of these, they look great, but what they are mounted on. My towbar fastens to the crossmember and the chassis, it only tows a 3 tonne trailer. Is a crossmember strong enough if you have to pull a Landy out of mud or something?
Not questioning the quality of these, they look great, but what they are mounted on. My towbar fastens to the crossmember and the chassis, it only tows a 3 tonne trailer. Is a crossmember strong enough if you have to pull a Landy out of mud or something?
- Posts
- 1,696
- Location
- towie hell
Your x member really needs to be in good condition, but these put no more stress in than when all we had was nato hitches for recovery.
If youve one of my x members youll be fine
If youve one of my x members youll be fine
- Posts
- 1,696
- Location
- towie hell
Thanks, give me a pmIl av one matey
