TorsionBhudda
Well-Known Member
- Posts
- 1,342
- Location
- Falkirk
Finally got my landy back on the road after rebuilding my LT77 gearbox couple of issues 1. It’s quite tight/hard to get in to first and second sometimes at a junction have to keep trying to work at it especially to get it into first. It’s generally tight through all the gears and have had odd crunch going into 3rd and 4th will this ease off as everything beds in?
2.
I have a rattle when idle wasn’t noticeable yesterday on its first run out but tonight after probably 10-15miles you can hear it think possibly clutch release bearing as goes away when press the clutch. If it is then my own fault as reused the one that was fitted when gearbox failed as it was a HD one and only 3000miles old.
2.
I have a rattle when idle wasn’t noticeable yesterday on its first run out but tonight after probably 10-15miles you can hear it think possibly clutch release bearing as goes away when press the clutch. If it is then my own fault as reused the one that was fitted when gearbox failed as it was a HD one and only 3000miles old.