rear wiper wiring

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

davebaird

Member
Posts
22
Location
Banbury
Need to install a new rear wiper motor. The old one has the wiring into a round plug, whilst the new one has 2 plugs. Doing a bit of searching I can get the plug not sure about the other plug, a couple of questions
1. are the nut and grommet available separate
2. What order do the wires go to the plugs if you are looking at the motor face on
 
The Green is the permanent +ive for the parking switch, the Black goes from the motor to earth.

The other two will be Red/Light Green and Brown/Light green.

IIRC both the Red/Light Green and Brown/Light green go back to the switch.
 
cheers oldseadog, the red/light green and black are for the motor that I know. The green, brown/light green + black are for the parking switch its the order they connect to the plug I am after
 
Back
Top