Rear Seatbelt Anchorage

Hi guys, Hope you can get me out the **** :doh:

Whilst replacing the floor on the Disco 1 I came across a problem... Seatbelts stuck more than.. Well a stuck thing. Anyway, I have come to the conclusion... they ain't comming out! Therefore i need new brackets, new pin and a new bolt. I managed to get the head off the bolt with a grinder yesterday.

Problem is... I can't find the pin or bolt, nor can i find P/n's anywere?

Found the bracket at LRSeries (390774 REAR SEAT BELT ANCHORAGE BRACKET LOWER | Discovery 1 1989-1998: Body/Fittings | shop | www.lrseries.com | L. R. Series)

Anyone have a part's diagram or any clue were to get the pin or bolt? Not to keen on using a normal bolt as the one i took off was probably High-tensile... Cheers!

Found de pin (577259 CLEVIS PIN | Discovery 1 1989-1998: Body/Fittings | shop | www.lrseries.com | L. R. Series)

Now just the bolt....

i had same problem mate. I ground off the tops of the bolts also. drilled out the remainder of the bolt, re-tapped the nut and used new bolts.

If you have the tools then have fun!

The eye bolt is p/no BTR8341 but LR.series are out of stock (old p/no 595099)

gerra high tensilt bolt then ,