Landyfella
Active Member
- Posts
- 162
- Location
- Cambridge
Rear main seal replacement
- Thread starter Landyfella
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Landyfella
Active Member
- Posts
- 162
- Location
- Cambridge
Can I put some silkaflex down there or is that just futile? Thx
steve2286w
Well-Known Member
- Posts
- 4,579
- Location
- monkeyangerland
Its hard to sort that I did it once just tapping it in while squeezing each side
Recently the T piece I got was far too thick , thought I would try thinning it down then put old one it with aerograde blue hylomar , I have heard peeps do away with T piece and use solely silicon rubber
Recently the T piece I got was far too thick , thought I would try thinning it down then put old one it with aerograde blue hylomar , I have heard peeps do away with T piece and use solely silicon rubber
I know on the tdi engines there is a recommendation to remove it and just pump full of gasket sealant although I replaced it on the one I did recently.
Similar threads
