John Goldie
Member
- Posts
- 26
- Location
- California
Lucas has struck again ...... I seem to have a short between the running light circuit and the reverse lights...... If I shift into reverse with no lights on, getting back up (white) and tail lights on...... or if dash toggle set to running lights, then back up lights also come on along with tails...... turn signals working fine....brake lights working when the pressure switch feels like it (see other post)... I suspect short between the reverse & rear tail +12V lines.... or perhaps some weird floating ground creating some strange current loop .......... Any debug ideas?
Was thinking to unhook the back lights and reconnect one at a time (both back up, both tail lights), also to volt meter the open leads and inspect / clean the ground connections....... I dont think it is dash toggle as that has nothing to do with the reverse lights (or it shouldn't).
Any one else seen this or have recommended debug ideas?
Thanks!
Cali Bugeye
Was thinking to unhook the back lights and reconnect one at a time (both back up, both tail lights), also to volt meter the open leads and inspect / clean the ground connections....... I dont think it is dash toggle as that has nothing to do with the reverse lights (or it shouldn't).
Any one else seen this or have recommended debug ideas?
Thanks!
Cali Bugeye