Re: WTD: LH exhaust manifold for 89 110 V8

In <[email protected]> Simon Birkby wrote:
> Anyone got a spare one kicking around? Mine has a crack in the flange
> where it connects to the downpipe.
>
> /Simon

Where are you ?

I'm fairly certain I have a couple kicking around at the back of my shed....
you can have them for nowt if you want to come and collect... I'm in
North Yorkshire.

They came off a 1990 110 V8 (ex MOD)

cheers

Dave W.
http://www.yorkshireoffroadclub.net/

In article <[email protected]>,
[email protected] says...

> Where are you ?
>
> I'm fairly certain I have a couple kicking around at the back of my shed....
> you can have them for nowt if you want to come and collect... I'm in
> North Yorkshire.
>
> They came off a 1990 110 V8 (ex MOD)
>
> cheers
>
> Dave W.
> http://www.yorkshireoffroadclub.net/

I'm in Surrey.

It's the LH one (looking from the rear) I need. If no-one else has one
closer, I'd be happy to pay postage, if you don't mind posting it?

Just to be sure it's the right type, my (busted) manifold has a flange
at the downpipe end with three studs spaced evenly round the
circumference. It's the type where the downpipe has a corresponding
collar that mates with the studs on the manifold so that when you bolt
it up, it clamps the downpipe (gas)tight against the manifold.

Cheers, Simon

In <[email protected]> Simon Birkby wrote:
> It's the LH one (looking from the rear) I need. If no-one else has one
> closer, I'd be happy to pay postage, if you don't mind posting it?
>
> Just to be sure it's the right type, my (busted) manifold has a flange
> at the downpipe end with three studs spaced evenly round the
> circumference. It's the type where the downpipe has a corresponding
> collar that mates with the studs on the manifold so that when you bolt
> it up, it clamps the downpipe (gas)tight against the manifold.

There are two types of these that I've come across. Both have 3 studs
but on one type the fitting is similar to a large olive joint, on the
other the exhaust has a flat flange on it that locates in a small
machined ring on the manifold. I'm pretty sure I have the earlier type.

If you contact me via email I'll take a picture of it this afternoon.
Remove the _nospamhere bit of the address.

Shouldn't be a problem posting it if needed.

cheers

Dave W
http://www.yorkshireoffroadclub.net/

In article <[email protected]>,
[email protected] says...

> Where are you ?
>
> I'm fairly certain I have a couple kicking around at the back of my shed....
> you can have them for nowt if you want to come and collect... I'm in
> North Yorkshire.
>
> They came off a 1990 110 V8 (ex MOD)
>
> cheers
>
> Dave W.
> http://www.yorkshireoffroadclub.net/

I'm in Surrey.

It's the LH one (looking from the rear) I need. If no-one else has one
closer, I'd be happy to pay postage, if you don't mind posting it?

Just to be sure it's the right type, my (busted) manifold has a flange
at the downpipe end with three studs spaced evenly round the
circumference. It's the type where the downpipe has a corresponding
collar that mates with the studs on the manifold so that when you bolt
it up, it clamps the downpipe (gas)tight against the manifold.

Cheers, Simon