Re: rev counter

"Mr.Nice." <[email protected]> wrote in message
news:[email protected]...
> my new (ish) alternator has an output for a rev counter.
> could I fit one of those td5 rev counters to run from the alternator
> output?
> if so is the rev range of my 1984 2.5 na diesel similar to the td5?
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)
> --
> ___________________________________________________________
> You need only two tools: WD-40 and Duct Tape.
> If it doesn't move and it should, use WD-40.
> If it moves and shouldn't, use the duct tape.
> www.markvarleyphoto.co.uk - 1984 110 CSW 2.5(na)D
> ___________________________________________________________
>
>
>
> ................................................................
> Posted via TITANnews - Uncensored Newsgroups Access
> >>>> at http://www.TitanNews.com <<<<
> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
>

Here's one specifically for the TD5:
http://www.lowtension.com/landrover.htm
Works off the ECU so should be accurate

Tom

In article <[email protected]>, Tom Gilmour wrote:
>
> Here's one specifically for the TD5:
> http://www.lowtension.com/landrover.htm
> Works off the ECU so should be accurate
>
> Tom
>

I was just about to ask if this is the one the OP was asking about.

If it is then it is supposed to work fine with the later alternators. I've
had one sitting in its box for about ten months now waiting to be fitted to
my 300Tdi 110. You have to lose the clock on mine and shift the fuel and
temp gauges along to make way for it.

When I got mine the guys at lowtension were very helpfull on the 'phone, might
be worth giving them a call.


--
simon at sbarr dot demon dot co dot uk
Simon Barr.
'97 110 300Tdi.