Re: interior light switch

Just bypass it. In the series the way these things are wired is annoying,
you need the side lights on to put the interior on, but it is easy just to
wire the switch direct to the fusebox, where that is on a 110 I don't know
but if it is lucar connectors it is easy to use a piggy back.


--
Larry
Series 3 rust and holes
"Mr.Nice." <[email protected]> wrote in message
news:[email protected]...
> I'm about to fit some flourescent lights into my 110.
> question is, the interior light switch on the dash, it also switches
> the dash panel lights on and off but only with the sidelights, does
> this mean that it needs the sidelights on to switch the interior
> lights on?
> I may bypass this switch, is there a permenant live feed I can tap
> from the dash or should I run-up a line from the battery direct (via
> an in-line fuse)?
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)
> --
> _________________________________________
> www.markvarleyphoto.co.uk
> 1984 110 CSW 2.5(na)D
> (3,000 rivets flying in close formation)
> _________________________________________
>
>
>
> ................................................................
> Posted via TITANnews - Uncensored Newsgroups Access
> >>>> at http://www.TitanNews.com <<<<
> -=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-
>