Re-framing doors

Angus Murphy · Apr 6, 2021

Hi
The skins on my series 3 doors are in reasonable condition
Is it possible to buy galvanised frames to re-use the original skins?
Thanks
Angus

steve2286w · Apr 7, 2021

Hi
You can certainly buy the frame sections, has your frames gone all over or just the bottoms, I replaced rear door bottom bits and put new skin on quite successfully,

rob1miles · Apr 7, 2021

Give SP Panels a call and see if they will sell you the frame without the skin. They manufacture so its worth asking.
https://www.sp-4x4.com/GALVANISED_SERIES_2_DOOR_BOTTOM_337791_p/337791galv.htm

Angus Murphy · Apr 9, 2021

steve2286w said:
Hi
You can certainly buy the frame sections, has your frames gone all over or just the bottoms, I replaced rear door bottom bits and put new skin on quite successfully,

Hi, thanks yours, the whole frame is shot on all three doors but the skins are in good nick.
Where would be the best place to get the complete frames?

Angus Murphy · Apr 9, 2021

Angus Murphy said:
Hi, thanks yours, the whole frame is shot on all three doors but the skins are in good nick.
Where would be the best place to get the complete frames?

Oops sorry, not quite got the hang of the forum yet, didn’t see rob1miles post!

Angus Murphy · Apr 9, 2021

Angus Murphy said:
Oops sorry, not quite got the hang of the forum yet, didn’t see rob1miles post!

Hi again
I tried SP panels and they only do doors with skins, not frames only.
Any other suggestions?
Thanks

wreckrunner · Apr 16, 2021

Buy the complete doors, remove the new skins and sell them on here and then you have nice new frames!

rob1miles · Apr 17, 2021

Pity about SP, they were my goto bet. Have you tried YRM?

Re-framing doors

Angus Murphy

New Member

steve2286w

Well-Known Member

rob1miles

Well-Known Member

Angus Murphy

New Member

Angus Murphy

New Member

Angus Murphy

New Member

wreckrunner

New Member

rob1miles

Well-Known Member

Similar threads