Range Rover p38

Recovery man · Apr 21, 2020

Hi guys This is my first post so be gentle.I am having trouble with my 2.5D p38
basically it is as flat as a F**t if I pull up to the kerb outside my house it will not
drive up until I really give it some welly. You cannot pull out of a junction without
looking for a long gap in traffic. It starts well ticks over fine and revs up with no hesitation
or smoke.I have drained the auto box and topped up with new fluid and changed the filter.
Any help would be appreciated.

brianp38dse · Apr 22, 2020

Hello and welcome

Best to post over in the range rover section of the forum this is the intro section

https://www.landyzone.co.uk/forum/range-rover.10/

Have a check if the map pipe same as injector spill pipes but runs from MAP sensor on the fuel filter housing to a spigot under the inlet manifold, make sure pipe is sound and not blocked in the inlet, a quick test is pull pipe of map and if car is same its not working.

Hippo · Apr 22, 2020

Welcome to the forum

gold rover · Apr 22, 2020

Welcome.
Just a side note. No idea what others think but 'be gentle cos it's my first post' posts , make me want to tear it wide.

Again, welcome

RangeRoller dt · Apr 26, 2020

Welcome to LandyZone

Your in the right place

kermit_rr · Apr 26, 2020

Hi there and welcome!.
Gear box in limp mode?

kurtjohnson10 · Apr 26, 2020

He must be still thinking about it

brianp38dse · Apr 26, 2020

kurtjohnson10 said:
He must be still thinking about it

That or the map pipe was the answer

kurtjohnson10 · Apr 26, 2020

brianp38dse said:
That or the map pipe was the answer

Forgot his password maybe

RangeRoller dt · Apr 26, 2020

He may need time to recover

Range Rover p38

Recovery man

New Member

brianp38dse

Well-Known Member

Hippo

Lord Hippo

gold rover

Well-Known Member

RangeRoller dt

Well-Sprung Member

kermit_rr

Very

kurtjohnson10

Well-Known Member

brianp38dse

Well-Known Member

kurtjohnson10

Well-Known Member

RangeRoller dt

Well-Sprung Member

Similar threads