Dillbert
New Member
- Posts
- 3
- Location
- Cheltenham, UK
Where can I find the readings for the servo vacuum pump and suspension. I have readings on my test unit but cannot verify them.
Range Rover L233 test readings.
- Thread starter Dillbert
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
From a manual I have I found this up to 2007 I think,But without knowing year and model it could all be wrong
As my 2011 manual state 210psi working pressure in tank.
“
The compressor is used to supply air pressure to the air suspension reservoir. The ECU monitors the pressure within the reservoir and, when the engine is running, maintains a pressure of:
l 13.7 bar (199 lbf/in2), in systems without an external pressure relief valve
l 11.8 bar (171 lbf/in2), in systems with an external pressure relief valve”
Manual available here for different years.
https://manuals.co/workshop/land-rover/range-rover
J
As my 2011 manual state 210psi working pressure in tank.
“
The compressor is used to supply air pressure to the air suspension reservoir. The ECU monitors the pressure within the reservoir and, when the engine is running, maintains a pressure of:
l 13.7 bar (199 lbf/in2), in systems without an external pressure relief valve
l 11.8 bar (171 lbf/in2), in systems with an external pressure relief valve”
Manual available here for different years.
https://manuals.co/workshop/land-rover/range-rover
J
Last edited:
Similar threads
