P38A Range Rover 4.6 hse Auto 99/2000 auto gearbox problems
- Thread starter rhanglo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,191
- Location
- Near Poitiers SW France
Check for fuse 11 in the fuse box under the drivers seat. Try selecting 1st gear with the lever and see if it moves.
Check all the oil has not drained out.
I assume the battery is good?
Datatek
Well-Known Member
- Posts
- 44,191
- Location
- Near Poitiers SW France
To clarify, fuse 11 should not be fitted, it selects transfer box neutral for towing.
Henry_b
Think outside, no box required.
- Posts
- 15,373
- Location
- somewhere else
Oil level.
Try selecting 1ss instead of D, once you are sure the gearbox has oil in it..
Might also be the XYZ switch, try thrashing the lever from P-1 again when the level is verified.
Try selecting 1ss instead of D, once you are sure the gearbox has oil in it..
Might also be the XYZ switch, try thrashing the lever from P-1 again when the level is verified.
- Posts
- 15,407
- Location
- Benfleet, Essex
5L can of 4-Star and a box of Swan Vesta's should see it going nicely.
- Posts
- 19,050
- Location
- Buckinghamshire, UK. ('95 DT)
5L can of 4-Star and a box of Swan Vesta's should see it going nicely.
But only on a one way trip to the big car-park in the sky.
Similar threads
